Print Thingy.

A 180 mm Thingy for a desk or a shelf, in one colour, standing on his own base.

He keeps the pose of the original drawing, the librarian coat and his first face, raised from the screen. The 3MF opens in Bambu Studio and most other slicers; the STL is for the rest.

Download the 3MF 9.5 MB Download the STL ZIP, 19.3 MB

The Thingy print model from the front, rendered in ivory PLA: one finger raised, a bow tie, THINGY on his badge

The print model from the front left — Three-quarter

The print model from his left side — Side

A close view of the face: a wink, a happy eye and a smile, raised from the screen — The face, raised

On a Bambu Lab P2S

Nozzle: 0.4 mm
Filament: Bambu PLA Basic, any one colour
Process: 0.16mm High Quality @BBL P2S
Supports: On: tree (auto), organic
Infill: 12%
Walls: 3
Brim: Outer, 5 mm
Orientation: Upright on his base, as the file comes

Any printer with a 0.4 mm nozzle and room for 120 × 62 × 180 mm will do.

What’s in the shape

One solid with no hollows: the coat and sleeves are filled down to the body beneath.
The face strokes stand about 0.9 mm proud of the screen, and the THINGY lettering 0.5 mm proud of the badge.
The antenna is a little thicker than on screen, so it survives a desk.
An oval base, 89 × 55 mm, keeps him standing.

This is the first version of the file, and he has not been printed yet. Expect to check the supports under the coat hem and the head.

Yours to print.

Thingy is by Jamie Thingelstad. The print model is licensed CC BY-NC 4.0: print him, share him and change him, with credit, and not commercially. The sizes and checksums are in the print manifest.